Extraction:
The word extraction itself defines the principle of the operation where the component is extracted from the solution or a mixture. The technique of removing one component from a solid or liquid by using a liquid solvent is known as the extraction process. The technique can be divided into two categories based on the dissolving soluble matter from its mixture with an insoluble solid with help of a solvent which is called leaching whereas liquid extraction is used to separate two miscible liquids by the use of a solvent that preferentially dissolves one of them.
A solvent employed in a liquid-liquid extraction operation should preferably have low viscosity and high interfacial tension. Separation by solvent extraction is not possible if the selectivity is 1. Solvent extraction should preferably be carried out at temperatures below the critical solution temperature above the critical solution temperature equal to the critical solution temperature. On a distribution curve, the plait point is that point where y = x, at the plait point selectivity, is 1.
There is a direct relationship between the distribution coefficient and the solvent requirement as the distribution coefficient increases, the solvent requirement for a given separation decreases. The apex of an equilateral triangular coordinate (in a ternary liquid system) represents a pure component. In equilateral triangular coordinates, a point on any side of the triangle represents a pure component of the binary mixture as the interfacial tension of a liquid-liquid system decreases, the ease of Coalescence decreases for liquids of very small density difference and the most suitable extractor is a centrifugal extractor.
Podielniak extractor is a special type of centrifugal extractor. A spray tower is a differential contact extractor, Pulsing of a packed column extractor results in a larger liquid-liquid interfacial area and higher mass transfer coefficient. For extraction of penicillin from nutrient broth, the most suitable extractor is a centrifugal extractor for liquid-liquid systems that form emulsions; the most suitable contractor is a centrifugal extractor.
The indexing process is a solvent extraction process in which benzene, toluene, and xylene present in catalytic reformats are extracted with sulfur dioxide or diethylene glycol. One of the solvents in the Duo-Sol process is propane.
Mercaptans present in light distillates are removed by extraction with an aqueous caustic soda solution. In the hydrochloric acid route for the production of phosphoric acid, phosphoric acid is extracted from a mixture of aqueous phosphoric acid and calcium chloride solution by C5 – alcohols. In the Edeleanu process (one of the solvent extraction processes applied to light distillates in petroleum refineries) sulfur dioxide is used as a solvent.
At the boiling point of sulfur dioxide, which is 14oF, the components which are miscible with sulfur dioxide are aromatic and unsaturated hydrocarbons. The operation which is employed for the removal of caffeine from coffee is solvent extraction.
Extraction by supercritical CO2 is particularly important in the food industry. The major application of the sulfolane extraction process is for the production of benzene, toluene, and xylene of high purity from a mixture of aromatics and nonaromatics.
Related topic – click here
- MASS TRANSFER DRYING
- What Is Diffusivity And How It Is Related To Mass Transfer And Its Coefficient, How They Are Related?
- Level Measuring Methods | MAGNESIUM AND ALKALINITY
- Hydrorefining Of Crude Benzol Flow Sheet
- Mass Transfer Operation Humidification
- HEAT TRANSFER In Boiling Condition
- HOLD– UP STUDIES (FLOODING VELOCITY)
- Calculation Of Steam Consumption And Vaporization Capacity Using OPEN PAN EVAPORATOR
- What Is Glass And What Types Of Glasses
